Alizarin Cprint Light Color Laser Transfer Paper ( warm peel)

Product Sizes: A(8.5''X11'') - 20 Sheets, B(11''X17'')- 20 Sheets,
                       A4(210mm X 297mm)-20 Sheets, A3(297mm X 420mm)- 20Sheets
1. Application
   This product is recommended with most color laser copier printers, color Laser Printers for T-shirts, aprons, gift bags, mouse pads, photographs on quilts etc.
2. Advantage
◆Customize Fabric with favorite photos and color graphics
◆Designed for vivid results on white or light-colored cotton or cotton/polyester blend fabrics
◆Ideal for personalizing T-shirts, canvas bags, wool garment, aprons, gift bags, mouse pads, photographs on quilts etc. 
◆ Transfer peels off easily with hot
◆Iron on with a regular household iron & Heat Transfer Press machines
◆washable up to textile professinal standard.
◆no need to cut off edges,unprinted can not transfer onto fabric, more soft touch.
3. Compatibility for Light Color Laser Transfer Paper
    It can be printed with some of color laser printers:Epson AcuLaser CX11N, C7000, C8600, Fuji Xerox DocuPrint C525 A, C3210DX, Canon laser shot LBP5600・LBP5900・LBP5500・LBP5800, Canon CLC1100・CLC1130・CLC1160・CLC5000, CanoniRC2620・3100・3200 etc.
4. Printer Recommendations
    Printer Settings for optimal print quality: To optimize print quality, printers should be set for photo print quality.
    Laser Printers Compatibility: It is designed to work with most Laser printers.

5. Transfer processing

A. Prepare a stable, heat-resistant surface suitable for ironing on.
B. Preheat the iron to the highest setting, recommended ironing temperature 200°C.
C. You can also use a heat press, set 185°C for 25 seconds using moderate or high pressure. The press should snap closed firmly.
D. Briefly iron the fabric to ensure that it is completely smooth, then place the transfer paper onto it with the printed image facing downwards.
a. Do not use the steam function.
b. Make sure that the heat is evenly transferred over the entire area.
c. Iron the transfer paper, applying as much pressure as possible.
e. When moving the iron, less pressure should be given.
f. Don't forget the corners and edges.
E. Continue ironing until you have completely traced the sides of the image. This entire process should take about 60-70 seconds for an 8"x 10" image surface.
F. Peel the transfer starting at the corner after the ironing process.
6. Washing Instructions
Wash inside out in cold water. do not use bleach. Place into the dryer or do hang to dry immediately.
7. Material Handling & Storage
conditions of 35-65% Relative Humidity and at a temperature of 10-30°C.